Door Repairs Near Me
Door repairs are an essential part of every home. They allow us to access and leave our homes, and also help in securing the home. Professionals in door repair can make sure that your doors are functioning properly and enhance the appearance of your property.
Enter your zip code in order to find rated and reviewed professionals near you.
Broken Glass
Broken glass is a common issue in both businesses and homes. It can be caused by a range of things, such as kids throwing baseballs into windows or someone bumping a mirror off the wall. Whatever the cause is, it's always frustrating and inconvenient to deal with broken glass.
The most important thing to do is pick up the broken pieces and dispose of them safely. This is essential because broken glass, particularly if it has been shattered in small pieces, could be dangerous. Glass can cause lacerations and cut the skin just like razors, sharp needles or knives. It is also a health hazard since it could be contaminated with harmful chemicals, blood and infectious agents that enter the body via cuts or punctures.
Cracked glass can be repaired with Bostik Fix & Glue. This adhesive can be applied to glass objects with small impact cracks, such as picture frames and window panes. It can also be applied to mirrors, sidelights for doors, kitchen glassware and mirrors. It can be used on single-pane window glass as well as some automotive glass. To make sure that the glue adheres cracks, they must be clean and dry.
The adhesive can be applied with a fine nozzle. The areas to be repaired should be lightly pressed together. This allows the glue to bond instantly, and stop the cracks spreading. However, it is important to keep in mind that small cracks may be visible following repair, although they won't be as prominent as before. Avoid extreme temperature fluctuations because cracks can expand and contract, causing more damage.
Broken Locks
If your lock is not working properly, you can make your home vulnerable to burglars. But if you have an DIY repair kit at your home, you can fix broken locks yourself, without having to engage a professional. First, you need to determine the cause of the problem. There are a number of possible causes, such as an alignment issue with the mechanical system or the key is damaged. It is important to repair a broken lock quickly before it causes more problems.
If you can turn the lock key, but it won't remain in place, you might have to replace the lock's cylinder or latch bolt. Also, inspect the hinges and frame of the door for any looseness or damage. This could be another reason the lock is damaged.
A jiggly lock means that the bolt hasn't entered or exited the strike plate in a proper manner. It can be fixed by moving the strike plate a bit. Be careful not to move it too much. If you move the strike plate too much the set screw holes on the plate could be too large. This could lead to an unstable lock.
If the key inserted into the lock, but it doesn't move, you may have rust or debris stuck in the keyway. Apply a lubricating solution to let the key move freely. You can also apply dry lubricants like graphite powder.
window glass repair near me that spins is an indication that the tailpiece in the lock has been damaged. It is usually a cheap component that can be purchased from a locksmith and replaced in a matter of minutes.
A key that is bent poses an extremely risky security issue as it can snap off from the lock and stop you from opening your door. You can flatten and then reshape the key using a vise. If you don't have a vise, you can place the key between two pieces of wood and hit it with a hammer or another heavy object. This will flatten the key and improve its ability to fit inside the lock.
Broken Rollers
The rollers help keep your door in the right alignment. If they are damaged, your door could be thrown off the track. However replacing the rollers can be a fairly simple home repair for a lot of homeowners. First, you must remove the sliding door from its track. Place it aside.
Find the screws for adjustment of the roller on the bottom of the door frame and loosen them. This will allow you to raise the door and access the broken roller. It's a good idea mark where the old roller was, so you can make sure that the replacement is placed in the same location.
Then, remove the roller from the track and check it for any damage. If you discover that the roller has been bent, use a pair metal bending pliers to try and bend it back to its original position. If you aren't able to bend the wheel back to its original position, it may be necessary to replace the entire roller. Install the new roller by following the same procedure as you used to remove the previous one.
It is also a good idea to consider lubricating your rollers while you're in the garage. This will reduce friction, allowing to make the door move smoothly. Be sure to choose a lubricant that isn't petroleum-based, since petroleum-based ones tend to attract dirt more quickly.
Once you're done, carefully lower the doors back onto the track. Be sure to replace all the screws and bolts that you removed. Also, ensure all the parts are in the proper order. Adjust the roller's height if needed. It should be about the threshold to ensure that the door doesn't rub against it, yet still allows the door to roll up.
After a few tries, you will be able the roller replaced and have your door operating smoothly once more. It's always a good idea to get a professional's help if you're not confident about your ability to do the task. It's easier for a professional to inspect the issue and determine the best option.
Broken Hinges
Over time the weight of a door can cause the hinges to break. This is particularly true if the screw holes in the door frame have been stripped. This is a frequent problem that you can easily fix with just a bit of effort. To fix the problem you can follow an easy method that involves drilling out the screw and then using dowels to fill the hole before putting in a new screw.
This method is particularly useful for wooden frames. It is better than trying to insert long screws into the stripped hole. Long screws could cause further damage to the wood. This method allows for the use of dowels that are the same size as existing holes, resulting in a stronger and secure fix.
Before drilling the new hole for your screw you must ensure that it's the correct size for hinge screws. One way to check this is to check the location of the current screw inside the frame with a spirit-level. Once you have figured out the location of the screw hole you can remove the screw that was previously in use. This should not be too difficult to do as the screw holes are often enlarged by the screw.
The next step is to measure the thickness of the door jamb. then cut lengths of round dowels that are a bit shorter than this measurement. After the dowels have been cut, they must be inserted into the screw hole and then carpenter glue applied to both sides of the dowel.
After the glue has dried, it's required to install a new screw in the hinge hole as well as the dowel. Then when the screw is in place it is crucial to give the dowel a chance to fully be firmly pressed.
To help prevent future issues for your door hinges, it is a good idea to spray them with regular lubricant. This will stop them from becoming stuck in the open or closed positions. You should be able to find a door hinge lubricant at your local home improvement retailer.